What Artwork Files an Embroidery Factory Actually Needs
Written by Liu Ronghui | Dongguan Dobest Industrial Co., Ltd., Founder & Technical Director Last updated: 2026-11-14
Most delays in custom embroidery do not happen on the machine. They happen in the first email: the buyer sends a picture, the factory asks for a vector, the buyer sends a different picture, and a week disappears before anyone has quoted.
This guide is the checklist we wish every buyer had before their first enquiry — what file formats work, what sizes hold up, and what "digitizing" actually is.
1. The short answer
Best: a vector file (AI, EPS, PDF with vector paths, SVG) at final size. Acceptable: a high-resolution PNG with transparent background, or a physical sample we can scan. Worst: a screenshot, a photo of a screen, or a JPEG taken from a chat app.
If you have nothing but a photo, send it — we can rebuild the artwork — but expect a confirmation step before quoting, because we will be interpreting rather than reproducing.
2. What "digitizing" actually means
Digitizing is the step that converts artwork into a machine file: the sequence of stitches, the direction of each fill, the underlay, the colour changes, and the density.
It is not "opening your PDF in a program". Two designers can digitize the same logo and produce files that look identical on screen and behave completely differently on fabric: one holds its shape after ten washes, the other puckers at the edges.
What digitizing decides:
- Stitch type per area — satin, tatami, fill, or pile;
- Stitch direction — which controls how light reflects and how the surface feels;
- Underlay — the hidden structure that stops the design distorting;
- Density — how tightly the thread packs, which drives both coverage and stiffness;
- Colour sequence — fewer changes means faster running and lower cost.

3. Which file formats work
| Format | Usable? | Why |
|---|---|---|
| AI / EPS / PDF (vector) | ✅ Best | Editable paths, exact dimensions, colour separated |
| SVG | ✅ Good | Vector, but check that text is converted to outlines |
| PNG, transparent background, ≥1500 px | ⚠️ Acceptable | Usable for simple shapes; edges must be clean |
| JPG / JPEG | ⚠️ Risky | Compression artefacts destroy thin lines and sharp corners |
| Screenshot / chat image | ❌ Avoid | Unknown scale, resampled, often cropped |
| Photo of a screen | ❌ Avoid | Moiré, colour shift, wrong aspect ratio |
| Physical sample / patch | ✅ Good | We scan and re-digitize; most reliable for legacy logos |
If your file contains text, convert text to outlines/curves before sending. Fonts that are not embedded will be substituted, and the shape will change.
4. Size and stroke limits by craft
These are practical floors from our own production, not theoretical minimums:
| Craft | Minimum stroke width | Minimum letter height | Notes |
|---|---|---|---|
| Flat satin | ~1.2 mm | ~5 mm | Below this, edges fray and letters fill in |
| Tatami fill | ~2.0 mm | ~6 mm | Very fine detail disappears into the fill |
| Chenille (loop pile) | ~2.5 mm | ~8 mm | Loops need room; thin strokes collapse |
| Toothbrush (vertical pile) | ~2.5–3.0 mm | ~10 mm | Pile height needs base area to lock |
| 3D puff | ~4.0 mm | ~10 mm | Foam cannot survive a narrow channel |
If your logo has a tagline smaller than the limit, the usual solution is to set it in flat stitch while the main mark uses the raised craft — a mixed construction, not a compromise.
5. The six things that break an artwork file
1. Hairline strokes. A 0.3 mm line looks fine on screen and disappears on fabric. 2. Gradients and soft shadows. Embroidery is discrete thread; gradients must be rebuilt as stepped colour blocks or a blend of threads. 3. Tiny reversed text. Knock-out lettering inside a filled shape closes up when the fill density is correct. 4. Overlapping semi-transparent layers. Embroidery has no transparency; every layer must be resolved into solid regions. 5. Low resolution. Below roughly 1500 px on the long edge, curve reconstruction becomes guesswork. 6. No defined final size. The same file at 4 cm and 12 cm needs different parameters; "standard size" is not a number.
6. The checklist to send with your enquiry
Send these seven items and most quotes can be turned around in one working day:
1. Artwork — vector preferred, or the highest-resolution raster you have; 2. Finished size — width × height in mm or cm; 3. Craft — flat, chenille, toothbrush pile, backing-free, or "please advise"; 4. Placement — chest, cap front, sleeve, bag panel; a photo of the product helps; 5. Colours — Pantone codes, or "match the artwork"; 6. Quantity — first order and expected annual volume; 7. Application — fabric type and how the item will be washed.
7. What happens after you send it
| Step | What we do | Typical time |
|---|---|---|
| 1 | Check the file for the six problems above, confirm size and craft | Same day |
| 2 | Digitize, then run a stitch-out on the intended fabric | 24–48 h (standard crafts) |
| 3 | Send photos + physical sample | With the sample |
| 4 | You approve, we lock the file | — |
| 5 | Bulk production | 5–10 working days after approval |
If the artwork needs rebuilding (photo-only references, gradients), we will say so at step 1 rather than after sampling.
8. FAQ
Do you charge for digitizing? Digitizing is included in the quotation for production orders. Standalone files for your own production are quoted separately.
Can you work from a competitor's finished patch? Yes — send the physical patch and we re-digitize from it. This is common for legacy logos where the original file is lost.
My logo has a gradient. Can it still be embroidered? Yes, but it will be rebuilt as stepped tones or a thread blend. The sample is where you judge whether the effect is acceptable.
Can you match a font exactly? If you send the font file or convert text to outlines, yes. If you send a picture of the text, we match the shape by eye and you approve the sample.
What if my file is only 72 dpi? It can be used as a visual reference, but the artwork will be redrawn. Expect a confirmation step before the quote is final.
Is a PDF always vector? No. A PDF exported from a design tool is usually vector; a PDF exported from a phone or a scan is a container for a bitmap. We check and tell you which one you sent.
9. What we need from you, in one line
Vector file + final size + craft + placement + colours + quantity. With those six, sampling starts the same day.
Next step: send the seven items in section 6 and sampling can start the same day. Send your artwork. If you also want to understand how the quote is built from that artwork, see how patch pricing is calculated.
